How to settig TP Link access point

 Name : Aldini Vida Steivia

Class :TBI-5C

1. Connect the access point with your computer using a UTP cable

2. Make sure the Access Point gets an internet network from the server

3. Turn on the Access Point by pressing the power button on the back of the access point

4. Reset Access Point, in resetting the access point there are two ways namely hard reset and soft reset

    Hard reset : press and hold the reset button on the back of the access point until all lights on

                      the indicators on the front of the access point light up simultaneously, but if too

                      frequently resetting the access point in this way can cause the access point to become hanky.

    Soft reset :-open the web tplinklogin.net on your PC

                     -Enter the username and password

                     -if the web page appears, select system tools

                     -then select the default setting, the default setting is to restore the access point settings to

                      factory default settings.

                     -then press ok and the access point has been successfully reset and is ready to be reset

5. Click the network tab>LAN>Setting IP Address>Save

6. Click the wireless tab>Wireless settings>change the "wireless network name" as desired>Save

7. Click wireless security>Select WPA/WPA2>Change password>Save

8. Click the DHCP tab>DHCP Settings>Enable DHCP Server

9. Fill in the start IP and end IP according to the range you want> Save

10. IP settings are complete